Solar laptop charger

Description:

I. Product Characteristic
1). SLC-001 adopts high efficient solar cell, suits outdoor task, tour, risk and any other situation Where emerrgency or green power is needed.
2). SLC-001 has a lithium battery of 2600mAh, 11.1V as its standbby cource. This makes its Discharge time and useful life longer.
3). SLC-001 has muti-output and multi-transfer-pin, can be used for handset, digital camera or Portable computer.
2. Function of indicators and ports Battery Low Indicator: When the battery voltage is low, the red low indicator light will be on. Please Take off the equipment at once and renew the standby battery at the short time. Charge Indicator: When the standy battery is being charged by solar, the green charge indicator light Will be on. After cgarged, the green will turn off, If using External Charger Input port to Charge, the green light has NON-efficiency. External Charge Input: When sunshine isn't strong enough, please use esternal source to charge the Standby battery by this port.
II: Input Type Solar energy / DC adapter
III: Input The Voltage DC 12V~20V
IV: Battery Voltage DC 11. 1v
V: Rating Power 28W
VI: Output DC voltage
[Output 1]: 5. 6±0. 2v, 350mA
(suitable for mobile phone charging and for 4 pcs 1. 2v rechargeable battery charging)
[Output 2]: 8. 4±0. 2v, 350mA
(suitable for didital camera and digital vidicon 's 7. 2v battery charging)
[Output 3]: 13. 7v±0. 2v, 500mA
(suitable for 12Vbattery charging or for DC 12V power supply directly)
[Output 4]: 17V±0. 2v, 650mA
(sutable for laptop computer charging)
VII: : Display Function LED (low power display, charging display)
VIII: Others Protect Fucttion Low voltage, battery fully charging, high load alarm and protect Functions
IX. Note
1. Before connceting to this production, please check the input voltage of equipment. An unsuitability Voltage will mangle the equipment or the charger.
2. During charging for portable computer, please pay attention to positive polarity and negative polarity of transfer plug to avoid damage to charge equipment which cause by wrong connection of polarity.
3. It it better that turning off the equipment before charging. If the equipment must be used, please turn On the equipment after charging for fifteen minutes.
4. During the charging, if the red light on, it means that the standby battery I used up. Disconnect the Equipment immediately please.
5. If the standy battery is low, must charge it at short time, or the battery performance will be serious effected.
6. Solar cell board adopts the toughened glass laminated technique; It is strong enough for some collision. But a sharp edge will exscind the glass, destroy the solar cell.
7. Cleaning the surface of solar cell board frequently, will gain a higher perfermance of photoelectric Transform.